| + - | 1 | Introduction |
| 1.1 | A New CAD tool on the Internet for Switching Power Supplies |
| 1.2 | Powerful Integrated features |
| 1.3 | A Tool for Engineers |
| 1.4 | A Tool for Managers |
| 1.5 | A Tool for Component Vendors |
| 1.6 | A Tool for Trainees |
| 1.7 | Subscription |
| 1.8 | System Requirement |
| + - | 1.9 | Introduction about User Interface |
| 1.9.1 | Main Menu |
| 1.9.2 | Top Menu |
| 1.9.3 | Design Area |
| 1.9.4 | PowerEsim News |
| 1.9.5 | PowerEsim's Sponsors |
| + - | 2 | Start a Power Supply Design |
| 2.1 | Introduction |
| + - | 2.2 | Start a power supply design |
| 2.2.1 | Start a Design by entering your specification |
| 2.2.2 | Start a Design from Topology |
| 2.2.3 | Start a Design from Reference Design |
| 2.3 | Change the specification of power supply design |
| 2.4 | View / Modify / Change a part from schematic page |
| 2.5 | Choose other topology |
| 2.6 | Change PWM Controller / Filter / Feedback circuit |
| 2.7 | View charts on the front page |
| 2.8 | Print Schematic Diagram |
| + - | 2.9 | Power Supply System (P.S. System) |
| 2.9.1 | Add Power Supply |
| 2.9.2 | Edit Power Supply |
| 2.9.3 | Replace / Remove / Save Power Supply |
| 2.9.4 | Add Input |
| 2.9.5 | Clear Whole Design |
| + - | 3 | Component Finder |
| 3.1 | What is Component Finder? |
| 3.2 | How to start the Component Finder page without topology |
| + - | 3.3 | Introduction about interface (without topology) |
| 3.3.1 | Component Designator |
| + - | 3.3.2 | Change searching criteria |
| 3.3.2.1 | Change the range of searching criteria. |
| 3.3.2.2 | Search component name by phrase |
| 3.3.3 | Select / Change a component from database |
| 3.3.4 | Select multiple components |
| 3.3.5 | Selected Component Box |
| + - | 3.3.6 | Component Analysis Tools |
| 3.3.6.1 | View Component Loss and Stress Summary |
| 3.3.6.2 | View Component Characteristics |
| 3.3.7 | Preview Component shape |
| 3.3.8 | No. of this component in parallel / series |
| 3.3.9 | Component Setting |
| 3.3.10 | Monte Carlo |
| 3.3.11 | Sample Request |
| 3.3.12 | Load Component |
| 3.3.13 | DataSheet |
| 3.3.14 | Switch between MOSFET / IGBT |
| 3.4 | How to start Component Finder page?(with topology) |
| 3.5 | Introduction about interface (with topology) |
| + - | 4 | Project Management |
| 4.1 | What is Project Management ? |
| 4.2 | How to start the Project Management Page |
| 4.3 | Introduction about interface of Project Management Page |
| 4.4 | Add Power Supply to Project |
| 4.5 | Save / Delete / Naming / Change Power Supply from Project |
| + - | 4.6 | Analysis the whole project by PowerEsim's tools |
| 4.6.1 | Loss Analysis under project management status |
| 4.6.2 | DVT Report under project management status |
| 4.6.3 | MTBF Analysis under project management status |
| 4.6.4 | Input Harmonic under project management status |
| 4.6.5 | BOM & Vendor under project management status |
| 4.6.6 | Add Component under project management status |
| 4.7 | Switch between Power Supplies |
| 4.8 | Select Power Supply |
| + - | 5 | Loss Analysis |
| 5.1 | What is Loss analysis? |
| 5.2 | How to start Loss Analysis as a Standalone Tool |
| + - | 5.3 | Introduction to Interface (Standalone Tool) |
| 5.3.1 | Top Bar |
| 5.3.2 | Component List |
| 5.4 | How to start Loss Analysis with Topology |
| + - | 5.5 | Introduction to Interface (With Topology) |
| 5.5.1 | Top Bar |
| 5.5.2 | Graph |
| 5.5.3 | Component List |
| + - | 6 | Waveform Analysis |
| 6.1 | What is waveform analysis? |
| 6.2 | How to start Waveform Analysis as a Standalone Tool |
| 6.3 | Introduction to Interface (Standalone Tool) |
| 6.4 | How to start Waveform Analysis with topology |
| + - | 6.5 | Introduction to Interface (with topology) |
| 6.5.1 | Plots in Waveform Analysis |
| 6.5.2 | Operating Condition Setting |
| + - | 7 | Monte Carlo Analysis |
| 7.1 | What is Monte Carlo Analysis? |
| 7.2 | How to start Monte Carlo as a standalone tool |
| 7.3 | Introduction to Interface (stand alone tool) |
| 7.4 | How to start Monte Carlo (with topology) |
| + - | 7.5 | Introduction to Interface (with topology) |
| 7.5.1 | Top Bar |
| 7.5.2 | No. of Sample |
| 7.5.3 | No. of variating component |
| 7.5.4 | Monte Carlo Analysis Result |
| 7.5.5 | List of enabled Monte Carlo Analysis components |
| 7.5.6 | Component List of all components in design |
| + - | 8 | Loop Analysis |
| + - | 8.1 | Loop Analysis |
| 8.1.1 | What is Loop Analysis? |
| 8.1.2 | How to start Loop Analysis as a Standalone Tool |
| + - | 8.1.3 | Introduction to Interface (Standalone Tool) |
| 8.1.3.1 | Top Bar |
| 8.1.3.2 | Change transfer function coefficients (ai and bi) |
| + - | 8.1.3.3 | Define the range of each coefficient for Automatic Compensation |
| 8.1.3.3.1 | Compensation Setting |
| 8.1.3.4 | Loop Chart |
| 8.1.3.5 | Enter Transient Analysis Page |
| 8.1.4 | How to start Loop Analysis with topology |
| + - | 8.1.5 | Introduction to Interface (With Topology) |
| 8.1.5.1 | Top Bar |
| + - | 8.1.5.2 | Automatic Compensation |
| 8.1.5.2.1 | Compensation Setting |
| 8.1.5.3 | Component List |
| 8.1.5.4 | Loop Chart |
| 8.1.5.5 | Enter Transient Analysis Page |
| + - | 8.2 | Transient Analysis |
| 8.2.1 | What is Transient Analysis? |
| 8.2.2 | How to start Transient Analysis as a Standalone Tool |
| + - | 8.2.3 | Introduction to Interface (Standalone Tool) |
| 8.2.3.1 | Top Bar |
| 8.2.3.2 | Loading Waveform |
| 8.2.3.3 | Transient O/P Waveform |
| 8.2.4 | How to start Transient Analysis With Topology |
| + - | 8.2.5 | Introduction to Interface (With Topology) |
| 8.2.5.1 | Top Bar |
| 8.2.5.2 | Select Output for Analysis |
| 8.2.5.3 | Loading Waveform |
| 8.2.5.4 | Transient O/P Waveform |
| + - | 9 | Thermal Analysis |
| 9.1 | What is thermal analysis? |
| 9.2 | How to start Thermal Analysis as a Standalone Tool |
| + - | 9.3 | Introduction to Interface (Standalone tool) |
| + - | 9.3.1 | Add Part |
| 9.3.1.1 | Add a part for thermal simulation |
| 9.3.1.2 | Add Printed Circuit Board PCB |
| 9.3.2 | Working Area |
| + - | 9.3.3 | Introduction to toolbar functions |
| 9.3.3.1 | Change to Component silk screen |
| 9.3.3.2 | Select multiple components and group them together |
| 9.3.3.3 | Rotate Components |
| 9.3.3.4 | Zoom in or zoom out the working area |
| 9.3.3.5 | Lock a component in position |
| 9.3.3.6 | Put SMT component on the PCB |
| + - | 9.3.3.7 | Start thermal simulation |
| 9.3.3.7.1 | Color map for temperature distribution |
| 9.3.4 | Find a part by designator |
| + - | 9.3.5 | Component Setting and Information |
| 9.3.5.1 | Get and update the physical location of parts after placement |
| 9.3.5.2 | Change Component |
| 9.3.5.3 | Information about selected component |
| 9.3.5.4 | View or edit the component settings |
| 9.3.6 | Scene control |
| + - | 9.3.7 | Top bar |
| 9.3.7.1 | Operating Condition Setting |
| 9.3.7.2 | Save / Load / Export to EXCEL format / Help manual |
| 9.4 | How to start the Thermal Analysis with design |
| + - | 9.5 | Introduction to Interface (with design) |
| + - | 9.5.1 | Top bar |
| 9.5.1.1 | Topology name |
| 9.5.1.2 | Operating Condition Setting |
| 9.5.1.3 | Hidden Part |
| 9.6 | Interface Requirements for viewing Thermal Analysis |
| 9.7 | Create different package style of components |
| 9.8 | Details on helpful shortcut keys |
| 9.9 | Defining Highlighted Losses of added parts |
| + - | 9.10 | Enable Adobe Flash Player in IE, Chrome, Firefox and Opera |
| 9.10.1 | Flash not working in Internet Explorer 11 |
| + - | 10 | Life & MTBF Analysis |
| 10.1 | What is MTBF analysis? |
| 10.2 | How to start Life & MTBF Analysis as a standalone tool |
| + - | 10.3 | Introduction to Interface (standalone tool) |
| 10.3.1 | Top Bar |
| 10.3.2 | Summary of Life & MTBF Analysis result |
| 10.3.3 | Component List |
| 10.3.4 | Export to Excel Format |
| 10.4 | How to start Life & MTBF Analysis (with topology) |
| 10.5 | Introduction to Interface (with topology) |
| + - | 11 | BOM - BOM Builder |
| 11.1 | What is BOM Builder? |
| 11.2 | How to start BOM Builder (without topology) |
| + - | 11.3 | Introduction to Interface (without topology) |
| 11.3.1 | Top Bar |
| + - | 11.3.2 | Modification of the file |
| 11.3.2.1 | View->Edit / Edit->View |
| 11.3.2.2 | Rev ? History |
| 11.3.3 | Component List |
| 11.4 | How to start BOM Builder (with topology) |
| 11.5 | Introduction to Interface (with topology) |
| + - | 12 | DVT Reports |
| 12.1 | What is DVT report? |
| 12.2 | How to start the DVT Report |
| 12.3 | Introduction to Interface (standalone tool) |
| 12.4 | How to start the DVT Report (with topology) |
| + - | 12.5 | Introduction to Interface (with design) |
| 12.5.1 | Top bar |
| 12.5.2 | 4 Corners Test |
| + - | 12.5.3 | Interface of Test Result |
| 12.5.3.1 | Test Name and Testing Condition |
| 12.5.3.2 | Circuit Design Verification |
| + - | 12.5.3.3 | Component Verification |
| + - | 12.5.3.3.1 | Component Setting |
| 12.5.3.3.1.1 | Component Value Setting |
| 12.5.3.3.1.2 | MTBF Factor |
| 12.5.3.3.1.3 | Air Flow |
| + - | 13 | Magnetic Builder |
| 13.1 | What is magnetic builder? |
| 13.2 | How to start Magnetic Builder (without design) |
| + - | 13.3 | Introduction to Interface (standalone tool) |
| 13.3.1 | Select the application of the magnetic component |
| 13.3.2 | Enter the Operating conditions of the application |
| 13.3.3 | General Function |
| + - | 13.3.4 | Recommended Transformer |
| + - | 13.3.4.1 | Advanced Page |
| 13.3.4.1.1 | Top Bar |
| + - | 13.3.4.1.2 | Winding Construction |
| 13.3.4.1.2.1 | Change inductance |
| 13.3.4.1.2.2 | Change core shape |
| + - | 13.3.4.1.2.3 | Winding |
| 13.3.4.1.2.3.1 | Change No. of Turns |
| 13.3.4.1.2.3.2 | Change Wire and No. of Parallel Wire |
| 13.3.4.1.2.3.3 | Change Winding Layer |
| 13.3.4.1.2.3.4 | Rdc+ac |
| + - | 13.3.4.1.2.3.5 | Winding Detail |
| 13.3.4.1.2.3.5.1 | N0 Detail |
| 13.3.4.1.2.3.5.2 | General |
| 13.3.4.1.2.4 | Varnish and UL Insulation System |
| 13.3.4.1.3 | Preview Image for Transformer |
| + - | 13.3.4.1.4 | Transformer Details Setting and General Function |
| 13.3.4.1.4.1 | Bobbin Setting |
| + - | 13.3.4.1.4.2 | Winding Construction |
| 13.3.4.1.4.2.1 | Tape Setting |
| 13.3.4.1.4.2.2 | Winding Construction |
| 13.3.4.1.4.3 | Winding Wizard Setting |
| 13.3.4.1.4.4 | Short Cut function |
| + - | 13.3.4.1.4.5 | General Function |
| 13.3.4.1.4.5.1 | Save Transformer |
| 13.3.4.1.4.5.2 | Load Transformer |
| 13.3.4.1.4.5.3 | Add Transformer to design |
| 13.3.4.1.4.5.4 | Generate Drawing |
| 13.3.4.1.4.5.5 | Transformer Tester |
| 13.3.4.1.4.5.6 | Transformer's Loss and Stress Summary |
| 13.3.4.1.4.5.7 | Sample Request |
| + - | 14 | Add Parts |
| 14.1 | What is Add Parts? |
| 14.2 | How to start Add Parts(without topology)? |
| + - | 14.3 | Introduction about interface(stand alone tool) |
| 14.3.1 | Top bar |
| + - | 14.3.2 | Create new components |
| 14.3.2.1 | Component Finder page |
| + - | 14.3.2.2 | General Component page |
| 14.3.2.2.1 | Customize a Heat Sink |
| 14.3.2.2.2 | Customize a PCB |
| 14.3.2.2.3 | Customize a Electrical Barrier |
| 14.3.2.2.4 | Customize other type of component |
| 14.3.2.2.5 | MTBF Properties |
| + - | 14.3.3 | Component List |
| 14.3.3.1 | View / Edit / Delete the added parts |
| 14.3.3.2 | MTBF Properties |
| 14.4 | How to start Add Parts(with topology)? |
| 14.5 | Introduction about interface (with topology) |
| + - | 15 | Report Builder |
| 15.1 | What is Report Builder? |
| 15.2 | How to start Report Builder(Standalone tool)? |
| 15.3 | Introduction about interface(Standalone tool) |
| 15.4 | How to start Report Builder(with topology)? |
| 15.5 | Introduction about interface (with topology) |
| + - | 16 | Harmonic |
| 16.1 | What is Input Harmonic Analysis? |
| 16.2 | How to start Input Harmonic Analysis?(Standalone Tool) |
| + - | 16.3 | Introduction about interface(Standalone Tool) |
| 16.3.1 | Top Bar |
| 16.3.2 | Input Harmonic Analysis Setting |
| 16.3.3 | Input Waveform |
| 16.3.4 | Simulated Harmonic |
| 16.4 | How to start Input Harmonic Analysis?(With Topology) |
| 16.5 | Introduction about interface(With Topology) |
| + - | 17 | EMI Analysis |
| 17.1 |
| + - | 18 | Component Builder |
| 18.1 | What is Component Builder ? |
| 18.2 | How to start Component Builder? (Standalone Tool) |
| 18.3 | Introduction about interface(Standalone Tool) |
| + - | 19 | Smart Optimizer |
| 19.1 | What is the Smart Optimizer? |
| 19.2 | How to start Smart Optimizer? (With Topology) |
| 19.3 | Introduction About Interface (With Topology) |
| + - | 20 | General Function in PowerEsim |
| 20.1 | Save and Load Design |
| 20.2 | Export the result in EXCEL format |
| 20.3 | Export the report in PDF format |
| 20.4 | User manual |
| 20.5 | Sample Request |
| 20.6 | Preference |
| 20.7 | Option |
| + - | 20.8 | PowerEsim Account |
| 20.8.1 | Login Private Account |
| + - | 20.8.2 | Sponsor Account |
| 20.8.2.1 | What is sponsor account? |
| 20.8.2.2 | How to login sponsor account? |
| + - | 20.8.2.3 | Index |
| 20.8.2.3.1 | Use Free Advanced Features Sponsor's Accounts |
| 20.8.2.3.2 | Apply your own Free Full Version Private Account |
| 20.8.2.3.3 | Let your components available at PowerEsim |
| 20.8.2.3.4 | Full Version Corporate Account |
| 20.8.2.3.5 | Features Tables For Different Accounts |
| 20.8.2.3.6 | Invite Friend To Join 14 Days PowerEsim Private Account |
| 21 | Troubleshooting |
| + - | 22 | PowerEsim Account Management |
| 22.1 | Add user account (for Administrator only) |
| 22.2 | Manage user account (for Administrator only) |
| 22.3 | Logout user(s) (for Administrator only) |
| 23 | PowerEsim Terms of use |
| + - | 24 | User Interface Practice |
| 24.1 | Button Color and Practice |
 | Better Than Real - Free Switch Mode Power Supply Circuit (SMPS) Design Software & Transformer Calculation / Simulation Tool. |
| PowerEsim User Manual |
Click on "Monte Carlo" on the left main menu to start Monte Carlo Analysis.
|
Home | Download | Useful Link | Video Demo | About | Contact Us | Disclaimer | FAQ Statistics | Account Management | Options | Preferences | Help | Table of Content |
|
Loss
| Thermal
| DVT Report
| Life & MTBF
| Loop & Stability
| Harmonic
| Monte Carlo
| Waveform
Magnetic Builder | BOM & Vendors | Comp. Builder | Report Builder | Add Part | Smart Optimizer |