+  1 Introduction
 +  2 Start a Power Supply Design
 +  3 Component Finder
 +  4 Project Management
 +  5 Loss Analysis
 +  6 Waveform Analysis
 +  7 Monte Carlo Analysis
 +  8 Loop Analysis
 +  9 Thermal Analysis
 +  10 Life & MTBF Analysis
 +  11 BOM - BOM Builder
 +  12 DVT Reports
 +  13 Magnetic Builder
 +  14 Add Parts
 +  15 Report Builder
 +  16 Harmonic
 +  17 EMI Analysis
 +  18 Component Builder
 +  19 Smart Optimizer
 +  20 General Function in PowerEsim
      21 Troubleshooting
 +  22 PowerEsim Account Management
      23 PowerEsim Terms of use
 +  24 User Interface Practice
Better Than Real - Free Switch Mode Power Supply Circuit (SMPS) Design Software & Transformer Calculation / Simulation Tool.
PowerEsim User Manual
PowerEsim is a free web-based software providing power supply (SMPS) design, transformer design, magnetic design, loss analysis, thermal analysis, waveform analysis, MTBF analysis, BOM building, DVT analysis and optimization of power supply (SMPS). Click to try PowerEsim (www.powerEsim.com)




9.3.7 Top bar Back to top



9.3.7.1 Operating Condition Setting Back to top
Users can modify the value of operating condition (Ta, input voltage and loading current) at the top bar. After modification, please click on "Recalculate" on the right to update the changes. Click on "Recalculate" to update the changes. Thermal results will then be changed.


9.3.7.2 Save / Load / Export to EXCEL format / Help manual Back to top
Please refer to Session 16--Harmonic.


Home | Download | Useful Link | Video Demo | About | Contact Us | Disclaimer | FAQ Statistics | Account Management | Options | Preferences | Help | Table of Content