PowerEsim is a free web-based software providing power supply (SMPS) design, transformer design, magnetic design, loss analysis, thermal analysis, waveform analysis, MTBF analysis, BOM building, DVT analysis and optimization of power supply (SMPS).
Click to try PowerEsim (www.powerEsim.com)
12.5 Introduction to Interface (with design) Back to top
Top bar
4 Corners Test
Current Condition Test
On this page, the Current Condition Test is shown at the bottom of the interface.
To enter the 4 Corners Test page, please click the [4 Corners Test] button.
To return to the previous page, click [Current Condition Test].
The 4 Corners Test page has six parts.
Summary Report for 4 Corners Test
Current Condition Test
4 Corners Test (Vin=L, Io=H)
4 Corners Test (Vin=H, Io=H)
4 Corners Test (Vin=L, Io=L)
4 Corners Test (Vin=H, Io=L)
In the position below, click the test name to jump to the position of the corresponding test result. For more details on the Interface of Test Result, please refer to Session 12.5.3--Interface of Test Result.
The circuit design verification results are shown in the "Result" column. There are three types of results (Pass, Warning, Reject). If the result is Warning or Reject, there will be a reason or suggestion appearing in the message column.
There are three types of results (Pass, Warning, Reject). If the result is Warning or Reject, there will be a reason or suggestion appearing in the message column.